Reference Guide

Command Groups 147
Utility Commands
Auto-Install
ip vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
show ip vrrp interface Displays the configured value for Accept Mode. UE or
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
boot auto-copy-sw allow-
downgrade
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
boot host autoreboot Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
boot host autosave Enables/disables automatically saving the
downloaded configuration on the switch.
GC
boot host dhcp Enables/disables Auto Config on the switch. GC
boot host retrycount Set the number of attempts to download a
configuration.
GC
show auto-copy-sw Displays Stack Firmware Synchronization
configuration status.
PE
show boot Displays the current status of the Auto Config
process.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 147 Friday, March 15, 2013 9:24 AM