Reference Guide

Captive Portal Commands 1461
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigab...
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0
show captive-portal configuration locales
Use the show captive-portal configuration locales command to display
locales associated with a specific captive portal configuration.
Syntax
show captive-portal configuration cp-id locales
• cp-id —Captive Portal Configuration ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 locales
Locale Code
---------------
en
show captive-portal configuration status
Use the show captive-portal configuration status command to display
information about all configured captive portal configurations or about a
specific captive portal configuration.
2CSPC4.XModular-SWUM204.book Page 1461 Friday, March 15, 2013 9:24 AM