Reference Guide

Command Groups 132
Multicast
Command Description Mode
a
ip mcast boundary Adds an administrative scope multicast
boundary.
IC
ip mroute Creates a static multicast route for a source
range.
GC
ip multicast Sets the administrative mode of the IP
multicast forwarder in the router to active.
GC
ip multicast ttl-threshold Applies a ttlvalue to a routing interface. IC
ip pim Administratively configures PIM mode for IP
multicast routing on a VLAN interface.
IC
ip pim bsr-border Administratively disables bootstrap router
(BSR) messages from being sent or received
through an interface.
IC
ip pim bsr-candidate Configures the router to advertise itself as a
bootstrap router (BSR).
GC
ip pim dense Administratively configures PIM dense mode
for IP multicast routing.
GC
ip pim dr-priority Administratively configures the advertised
designated router (DR) priority value.
IC
ip pim hello-interval Administratively configures the PIM Hello
messages on the specified interface.
IC
ip pim join-prune-interval Administratively configures the frequency of
join/prune messages on the specified interface.
IC
ip pim rp-address Defines the address of a PIM RP for a specific
multicast group range.
GC
ip pim rp-candidate Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP) for a specific multicast
group range.
IC
ip pim sparse Administratively configures PIM sparse mode
for IP multicast routing.
GC
2CSPC4.XModular-SWUM204.book Page 132 Friday, March 15, 2013 9:24 AM