Reference Guide

1194 IPv6 Multicast Commands
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim
ipv6 pim (VLAN Interface config)
Use the ipv6 pim command in VLAN Interface configuration mode to
administratively enable PIM-SM multicast routing mode on a particular IPv6
router interface. Use the no form of this command to disable PIM SM on an
interface.
Syntax
ipv6 pim
no ipv6 pim
Default Configuration
PIM-SM is disabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pim
2CSPC4.XModular-SWUM204.book Page 1194 Friday, March 15, 2013 9:24 AM