Reference Guide

Command Groups 103
Port Aggregator
lacp port-priority Configures the priority value for physical
ports.
IC
lacp system-priority Configures the system LACP priority. GC
lacp timeout Assigns an administrative LACP timeout. IC
port-channel min-links Sets the minimum number of links that must
be up in order for the port channel interface
to be declared up.
IC
show interfaces port-
channel
Displays port-channel information. PE
show lacp Displays LACP information for ports. PE
show statistics port-channel Displays port-channel statistics. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
add interface Adds member Ethernet port(s) to
the Aggregator Group.
PA
duplex Configures the full/half duplex
operation of all member ports in the
aggregator group/zone.
PA
lacp auto Sets the LACP (Link Aggregation)
mode to dynamic for that
Aggregator Group.
PA
lacp off Sets the LACP (Link Aggregation)
mode to off for that Aggregator
Group.
PA
lacp static Sets the LACP (Link Aggregation)
mode to static for that Aggregator
Group.
PA
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 103 Friday, March 15, 2013 9:24 AM