Reference Guide

Command Groups 101
LLDP
depends-on Adds the dependent Ethernet ports or port
channels list.
LD
show link-dependency Shows the link dependencies configured on a
particular group.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
clear lldp remote-data Deletes all data from the remote data table. PE
clear lldp statistics Resets all LLDP statistics. PE
lldp notification Enables remote data change notifications. IC
lldp notification-interval Limits how frequently remote data change
notifications are sent.
GC
lldp receive Enables the LLDP receive capability. IC
lldp timers Sets the timing parameters for local data
transmission on ports enabled for LLDP.
GC
lldp transmit Enables the LLDP advertise capability. IC
lldp transmit-mgmt Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
IC
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
IC
show lldp Displays the current LLDP configuration
summary.
PE
show lldp interface Displays the current LLDP interface state. PE
show lldp local-device Displays the LLDP local data. PE
show lldp remote-device Displays the current LLDP remote data. PE
show lldp statistics Displays the current LLDP traffic statistics. PE
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 101 Friday, March 15, 2013 9:24 AM