Reference Guide

Command Groups 100
iSCSI Optimization
Link Dependency
show ip source binding Displays all bindings (static and dynamic). PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
iscsi aging time Sets aging time for iSCSI sessions. GC
iscsi cos Sets the quality of service profile that will be
applied to iSCSI flows.
GC
iscsi enable Enables Global Configuration mode command
globally enables iSCSI awareness.
GC
iscsi target port Configures an iSCSI target port (optionally
configures target port address and name).
GC
show iscsi Displays the iSCSI settings. PE
show iscsi sessions Displays the iSCSI sessions. PE
Command Description Mode
a
action Indicates if the link-dependency group should
mirror or invert the status of the depended on
interfaces.
LD
link-dependency group Enters the link-dependency mode to configure
a link-dependency group.
GC
add gigabitethernet Adds member gigabit Ethernet port(s) to the
dependency list.
LD
add tengigabitethernet Adds member ten gigabit Ethernet port(s) to
the dependency list.
LD
add port-channel Adds member port-channels to the
dependency list.
LD
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 100 Friday, March 15, 2013 9:24 AM