Reference Guide

QoS Commands 675
console(config-classmap)#no match class-map Dell
match cos
Use the match cos command in Class-Map Configuration mode to add a
match condition for the class of service value (the only tag in a single-tagged
packet or the first or outer 802.1Q tag of a double-VLAN tagged packet).
Syntax
match cos
• cos-value — Specifies the CoS value as an integer (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition to the specified
class.
console(config-classmap)#match cos 1
match destination-address mac
Use the match destination-address mac command in Class-Map
Configuration mode to add a match condition based on the destination MAC
address of a packet.
Syntax
match destination-address mac macaddr macmask
2CSPC4.XModular-SWUM204.book Page 675 Friday, March 15, 2013 9:24 AM