Reference Guide

QoS Commands 659
Default Configuration
The default dot1p mapping is as follows:
Command Mode
Global Configuration or Interface Configuration (Ethernet, Port-channel)
mode
User Guidelines
None
Example
The following example configures mapping for user priority 1 and traffic class
2.
console(config)#classofservice dot1p-mapping 1 2
classofservice ip-dscp-mapping
Use the classofservice ip-dscp-mapping command in Global Configuration
mode to map an IP DSCP value to an internal traffic class. Use the no form of
the command to return the classofservice mapping to the default, and remove
a traffic class mapping for an IP DSCP value.
User Priority Traffic Class
01
10
20
31
42
52
63
73
2CSPC4.XModular-SWUM204.book Page 659 Friday, March 15, 2013 9:24 AM