Reference Guide

632 Port Channel Commands
• port-channel-number — Number of a valid port-channel with which to
associate the current interface.
•
on — Forces the port to join a channel without LACP (static LAG).
•
active — Forces the port to join a channel with LACP (dynamic LAG).
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how port 1/0/5 is configured to port-channel 1
without LACP
(static LAG) .
console(config)# interface gigabitethernet 1/0/5
console(config-if-1/0/5)# channel-group 1 mode on
The following example shows how port 1/0/6 is
configured to port-channel 1 with LACP
(dynamic LAG) .
console(config)# interface gigabitethernet 1/0/6
console(config-if-1/0/6)# channel-group 1 mode active
interface port-channel
Use the interface port-channel command in Global Configuration mode to
configure a port-channel type and enter port-channel configuration mode.
Syntax
interface port-channel port-channel-number
2CSPC4.XModular-SWUM204.book Page 632 Friday, March 15, 2013 9:24 AM