Reference Guide

620 Port Aggregator Commands
User Guidelines
This command is only available in simple mode.
Example
console(config)#port-aggregator group 2
console(config-aggregator-2)#minimum active uplinks 2
console(config-aggregator-2)#
mtu disable
Use the mtu disable command to set the mtu size to default (1518) on all the
member ports in the aggregator group/zone. To set the mtu size to the
maximum value (9216), use the no form of this command.
Syntax
mtu disable
no mtu disable
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command is only available in simple mode.
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#mtu disable
console(config-aggregator-1)#
2CSPC4.XModular-SWUM204.book Page 620 Friday, March 15, 2013 9:24 AM