Reference Guide

Port Aggregator Commands 617
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#speed 1000
console(config-aggregator-1)#
lacp auto
Use the lacp auto command to set the LACP (Link Aggregation) mode to
dynamic for that Aggregator Group. This means that when more than one
uplink port is in the Group, those uplink ports will be enabled automatically
with dynamic LACP.
Syntax
lacp auto
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command is only available if simple mode is enabled.
Example
console(config)#port-aggregator group 2
console(config-aggregator-2)#lacp auto
console(config-aggregator-2)#
2CSPC4.XModular-SWUM204.book Page 617 Friday, March 15, 2013 9:24 AM