Reference Guide

1746 System Management Commands
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
console>show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957
Unit Service tag Serial number Asset tag
----- ------------ -------------- -----------
1 89788978 8936589782 7843678957
2 4254675 3216523877 5621987728
show system power
Use the show system power command in User EXEC or Privileged EXEC
mode to display information about the system level power consumption.
Syntax
show system power
Parameter Description
This command does not require a parameter description.
2CSPC4.XModular-SWUM204.book Page 1746 Friday, March 15, 2013 9:24 AM