Reference Guide

System Management Commands 1731
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Config mode and all Config sub-modes
User Guidelines
The command has no user guidelines.
Example
The following example displays sample output of the show slot command.
console#show slot
Admin Power Configured Card
Slot Status State State Model ID Pluggable
----- ------ ------- ------- ------------------------- ------------
1/0 Full Enable Enable PCM8024-k No
1/1 Full Enable Enable DELL Ten-Gig SFP+ Card Yes
show supported cardtype
Use the show supported cardtype command in User EXEC mode to display
information about all card types supported in the system. If a card index is
entered, then the command displays information about specific card types
supported in the system. Card index values are specific to each family of
products. Use the generic form (without specifying an index) to display all the
card types for a product family.
Syntax
show supported cardtype [ cardindex ]
Configured Card Description The description of the card preconfigured
in the slot.
Parameter Description
2CSPC4.XModular-SWUM204.book Page 1731 Friday, March 15, 2013 9:24 AM