Reference Guide

System Management Commands 1729
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays a list of open telnet sessions to remote hosts.
console#show sessions
User NameConnection fromIdleSession Session
Time Time Type
--------- --------------- -------- --------- --------
---
---- EIA-232 00:00:0000:07:37 Serial
admin 192.168.1.248 00:00:17 00:00:26 Telnet
admin 192.168.1.248 00:00:1600:00:32 HTTP
console#
The following table describes the significant fields shown in the display.
Field Description
Connection Connection number
Host Remote host to which the switch is connected
through a Telnet session
Address IP address of the remote host
Port Telnet TCP port number
2CSPC4.XModular-SWUM204.book Page 1729 Friday, March 15, 2013 9:24 AM