Reference Guide

System Management Commands 1723
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
No specific guidelines.
Example
console#show ip interface out-of-band
IP Address............................ 10.240.4.115
Subnet Mask........................... 255.255.255.0
Default Gateway....................... 10.240.4.1
IPv6 Prefix is .......................
FE80::20A:1EFF:FE11:1100/64
ServPort Configured Protocol Current...None
Burned In MAC Address..................0006.2932.814C
show memory cpu
Use the show memory cpu command to check the total and available RAM
space on the switch.
Syntax
show memory cpu
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM204.book Page 1723 Friday, March 15, 2013 9:24 AM