Reference Guide

System Management Commands 1721
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
console#show hardware profile portmode
Configured Running
40G Interface 10G Interfaces Mode Mode
------------- -------------- ---------- -------
Fo1/0/1 Te1/0/25-28 1x40G 4x10G
Fo1/0/2 Te1/0/29-32 1x40G 1x40G
console#show hardware profile portmode fo1/0/1
Configured Running
40G Interface 10G Interfaces Mode Mode
------------- -------------- ---------- -------
Fo1/0/1 Te1/0/25-28 1x40G 4x10G
show interfaces advanced firmware
Use the show interfaces advanced firmware command to display the firmware
revision of the PHY for a port.
Syntax
show interfaces advanced firmware interface
2CSPC4.XModular-SWUM204.book Page 1721 Friday, March 15, 2013 9:24 AM