Reference Guide

Command Groups 135
OSPF
ipv6 pim ssm Defines the Source Specific Multicast (SSM)
range of multicast addresses.
GC
show ipv6 pim Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
PE or
GC
show ipv6 pim bsr Displays the bootstrap router (BSR)
information.
PE or
GC
show ipv6 pim bsr-router Display the bootstrap router (BSR)
information.
UE,
PE, or
GC
show ipv6 pim interface Displays interface config parameters. PE or
GC
show ipv6 pim neighbor Displays IPv6 PIMSM neighbors learned on the
routing interfaces.
PE or
GC
show ipv6 pim rphash Displays which rendezvous point (RP) is being
selected for a specified group.
PE or
GC
show ipv6 pim rp mapping Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the bootstrap router (BSR).
PE or
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
area default-cost (Router
OSPF)
Configures the advertised default cost for the
stub area.
ROSPF
area nssa (Router OSPF) Configures the specified area ID to function as an
NSSA.
ROSPF
area nssa default-info-
originate (Router OSPF
Config)
Configures the metric value and type for the
default route advertised into the NSSA.
ROSPF
area nssa no-redistribute Configures the NSSA Area Border router (ABR)
so that learned external routes are not
redistributed to the NSSA.
ROSPF
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 135 Friday, March 15, 2013 9:24 AM