Reference Guide

Command Groups 134
IPv6 Multicast
Command Description Mode
a
ipv6 pim (Global config) Administratively enables PIMSM for IPv6
multicast routing
GC
ipv6 pim (VLAN Interface
config)
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
IC
ipv6 pim bsr-border Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
IC
ipv6 pim bsr-candidate Configures the router to announce its
candidacy as a bootstrap router (BSR).
GC
ipv6 pim dense Administratively configures PIM dense mode
for IPv6 multicast routing.
GC
ipv6 pim dr-priority Sets the priority value for which a router is
elected as the designated router (DR).
IC
ipv6 pim hello-interval Administratively configures the PIM-SM Hello
Interval for the specified interface.
IC
ipv6 pim join-prune-interval Administratively configures the interface
join/prune interval for the PIM-SM router.
IC
ipv6 pim register-rate-limit Sets a limit on the maximum number of PIM
register messages sent per second for each (S,G)
entry
GC
ipv6 pim register-threshold Configures the Register Threshold rate for the
RP router to switch to the shortest path.
GC
ipv6 pim rp-address Statically configures the Rendezvous Point (RP)
address for one or more multicast groups.
GC
ipv6 pim rp-candidate Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
GC
ipv6 pim sparse (Global
config)
Administratively configures PIM sparse mode
for multicast routing.
GC
ipv6 pim spt-threshold Configures the Data Threshold rate for the last-
hop router to switch to the shortest path.
GC
2CSPC4.XModular-SWUM204.book Page 134 Friday, March 15, 2013 9:24 AM