Reference Guide

Command Groups 130
ipv6 nd other-config-flag Sets the other stateful configuration flag in
router advertisements sent from the
interface.
IC
ipv6 nd prefix Sets the IPv6 prefixes to include in the router
advertisement.
IC
ipv6 nd ra-interval Sets the transmission interval between router
advertisements.
IC
ipv6 nd ra-lifetime Sets the value that is placed in the Router
Lifetime field of the router advertisements
sent from the interface.
IC
ipv6 nd reachable-time Sets the router advertisement time to
consider a neighbor reachable after neighbor
discovery confirmation.
IC
ipv6 nd suppress-ra Suppresses router advertisement
transmission on an interface.
IC
ipv6 route Configures an IPv6 static route GC
ipv6 route distance Sets the default distance (preference) for
static routes.
GC
ipv6 unicast-routing Enables forwarding of IPv6 unicast
datagrams.
GC
ping ipv6 Determines whether another computer is on
the network.
PE
ping ipv6 interface Determines whether another computer is on
the network using Interface keyword.
PE
show ipv6 brief Displays the IPv6 status of forwarding mode
and IPv6 unicast routing mode.
PE
show ipv6 interface Shows the usability status of IPv6 interfaces. PE
show ipv6 mld groups Displays information about multicast groups
that MLD reported.
PE
show ipv6 mld interface Displays MLD related information for an
interface.
PE
show ipv6 mld-proxy Displays a summary of the host interface
status parameters.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 130 Friday, March 15, 2013 9:24 AM