Reference Guide

Command Groups 125
IGMP Proxy
ip igmp query-max-response-
time
Configures the maximum response time
interval for the specified interface.
IC
ip igmp robustness Configures the robustness that allows tuning
of the interface.
IC
ip igmp startup-query-count Sets the number of queries sent out on
startup—at intervals equal to the startup
query interval for the interface.
IC
ip igmp startup-query-
interval
Sets the interval between general queries sent
at startup on the interface.
IC
ip igmp version Configures the version of IGMP for an
interface.
IC
show ip igmp Displays system-wide IGMP information. PE
show ip igmp groups Displays the registered multicast groups on the
interface.
PE
show ip igmp interface Displays the IGMP information for the
specified interface.
PE
show ip igmp membership Displays the list of interfaces that have
registered in the multicast group.
PE
show ip igmp interface stats Displays the IGMP statistical information for
the interface.
PE
ip igmp router-alert-check Sets IGMP to not require the Router-Alert
field.
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
ip igmp-proxy Enables the IGMP Proxy on the router. IC
ip igmp-proxy reset-status Resets the host interface status parameters of
the IGMP Proxy router.
IC
ip igmp-proxy unsolicit-rprt-
interval
Sets the unsolicited report interval for the
IGMP Proxy router.
IC
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 125 Friday, March 15, 2013 9:24 AM