Command Line Interface Guide

96 Command Groups
IPv6 ACL
IPv6 MLD Snooping
show ipv6 dhcp interface
out-of-band statistics
Displays IPv6 DHCP statistics for the out-of-
band interface.
PE
show ipv6 interface out-of-
band
Displays the IPv6 out-of-band port
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
{deny | permit} Creates a new rule for the current IPv6 access
list.
v6ACL
ipv6 access-list Creates an IPv6 Access Control List (ACL)
consisting of classification fields defined for the
IP header of an IPv6 frame.
GC
ipv6 access-list rename Changes the name of an IPv6 ACL. GC
ipv6 traffic-filter Attaches a specific IPv6 ACL to an interface or
associates it with a VLAN ID in a given
direction.
GC
IC
show ipv6 access-lists Displays an IPv6 access list (and the rules
defined for it).
PE
Command Description Mode
a
ipv6 mld snooping
immediate-leave
Enables or disables MLD Snooping immediate-
leave admin mode on a selected interface or
VLAN.
IC
VLAN
ipv6 mld snooping
groupmembership-interval
Sets the MLD Group Membership Interval
time on a VLAN or interface.
IC
VLAN
ipv6 mld snooping
maxresponse
Sets the MLD Maximum Response time for an
interface or VLAN.
IC or
VLAN
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 96 Monday, October 3, 2011 2:21 PM