Command Line Interface Guide

90 Command Groups
Ethernet Configuration
show mail-server Displays the configuration of all the mail servers
or a particular mail server.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
clear counters Clears statistics on an interface. PE
description Adds a description to an interface. IC
duplex Configures the full/half duplex operation of a
given Ethernet interface when not using auto-
negotiation.
IC
flowcontrol Configures the flow control on a given interface. GC
interface Enters the interface configuration mode to
configure parameters for an interface.
GC or
IC
interface range Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
GC,
IC, IR
mtu Enables jumbo frames on an interface by
adjusting the maximum size of a packet or
maximum transmission unit (MTU).
IC
show interfaces advertise Displays information about auto negotiation
advertisement.
PE
show interfaces
configuration
Displays the configuration for all configured
interfaces.
UE
show interfaces counters Displays traffic seen by the physical interface. UE
show interfaces description Displays the description for all configured
interfaces.
UE
show interfaces detail Displays the detail for all configured interfaces. UE
show interfaces status Displays the status for all configured interfaces. UE
show statistics Displays statistics for one port or for the entire
switch.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 90 Monday, October 3, 2011 2:21 PM