Command Line Interface Guide

896 Priority Flow Control Commands
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Examples
The following examples show the priority flow control status and statistics.
s1#show interfaces tengigabitethernet 1/0/1 priority-
flow-control
Interface Detail: te1/0/1
PFC Configured State: Disabled
PFC Operational State: Enabled
Configured Drop Priorities: 2-7
Operational Drop Priorities: 2-7
Configured No-Drop Priorities: 0-1
Operational No-Drop Priorities: 0-1
Delay Allowance: 32456 bit times
Peer Configuration Compatible: True
Compatible Configuration Count: 3
Incompatible Configuration Count: 1
Priority Received PFC Frames Transmitted PFC Frames
-------- ----------------- ----------------------
Parameter Description
interface-id A valid Ethernet port identifier.
2CSPC4.XModular-SWUM201.book Page 896 Monday, October 3, 2011 2:21 PM