Command Line Interface Guide

86 Command Groups
DHCP L2 Relay
DHCP Management Interface
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
dhcp l2relay Enables the Layer 2 DHCP Relay agent for an
interface or globally.
GC or
IC
dhcp l2relay circuit-id Enables user to set the DHCP Option 82
Circuit ID for a VLAN.
GC
dhcp l2relay remote-id Enables user to set the DHCP Option 82
Remote ID for a VLAN.
GC
dhcp l2relay vlan Enables the L2 DHCP Relay agent for a set of
VLANs.
GC
dhcp l2relay trust Configures an interface to trust a received
DHCP Option 82.
IC
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
release dhcp Forces the DHCPv4 client to release a leased
address.
PE
renew dhcp Forces the DHCP client to immediately renew
an IPv4 address lane.
PE
debug dhcp packet Displays debug information about DHCPv4
client activities and traces DHCP v4 packets to
and from the local DHCPv4 client.
PE
show dhcp lease Displays IPv4 addresses leased from a DHCP
server.
PE
2CSPC4.XModular-SWUM201.book Page 86 Monday, October 3, 2011 2:21 PM