Command Line Interface Guide

856 Data Center Bridging Commands
Multiple Neighbors Detected: 0
Example 5
The following example displays DCBX enabled—detailed view. Displays the
transmitted and received TLV information. The ETS information is
documented in IEEE 802.1az D2.4, tables D-2, D-3, and D-4. The PFC
Enable Vector information is documented in IEEE 802.1az D2.4, table D-5.
The transmitted recommendation TLV is never displayed because it is always
the same as the configured TLV. The peer description is obtained from the
LLDP System Name:
switch(config)# show lldp dcbx interface te1/0/1 detail
Interface te1/0/1
DCBX Admin Status: Enabled
Configured Version: Auto-detect
Auto-configuration Port Role: Configuration Source
Peer Is Configuration Source: True
PFC Capability (TX Enabled)
Willing: True MBC: False Max PFC classes supported: 3
PFC Enable Vector: 0:0 1:1 2:0 3:0 4:0 5:1 6:0 7:0
Peer DCBX Version: CEE 1.6
Peer Description: Cisco Nexus 5020 IOS Version
5.00
Peer MAC: 00:23:24:A4:21:03
Peer PFC Capability:
Willing: False MBC: False Max PFC classes supported: 3
PFC Enable Vector 0:0 1:1 2:0 3:0 4:0 5:1 6:0 7:0
Peer Application Priority
2CSPC4.XModular-SWUM201.book Page 856 Monday, October 3, 2011 2:21 PM