Command Line Interface Guide

Data Center Bridging Commands 853
User Guidelines
This command has no user guidelines.
Example 1
The following example displays DCBX status.
switch(config)# show lldp dcbx interface all status
DCBX DCBX Frame TLV
Interface Status Role Version Tx Rx Dscrd
Dscrd
---------- ------- -------- -------- ------ ------ ------ -
-----
te1/0/1 Enabled Auto-up CEE 1.06 32 37 0
0
te1/0/2 Enabled Auto-up IEEE 32 37 0
0
te2/0/1 Enabled Auto-dn CIN 1.0 32 37 0
0
te2/0/2 Enabled Auto-dn IEEE 32 37 0
0
te3/0/1 Enabled Auto-dn CIN 1.0 32 37 0
0
te3/0/2 Disabled Manual IEEE 0 0 0
0
The following example displays DCBX enabled – legacy device (CIN/CEE).
switch(config)# show lldp dcbx interface te1/0/1 detail
Interface te1/0/1
DCBX Admin Status: Enabled
Configured Version: Auto-detect
Peer DCBX Version: CIN Version 1.0
Peer MAC: 00:23:24:A4:21:03
Peer Description: Cisco Nexus 5020 IOS
Version 5.00
2CSPC4.XModular-SWUM201.book Page 853 Monday, October 3, 2011 2:21 PM