Command Line Interface Guide

852 Data Center Bridging Commands
system-description
system-name
switch(config)# show lldp tlv-select interface all
Interface PFC App Priority
-------------- --- ------------
te1/0/1 Yes No
te1/0/2 Yes No
show lldp dcbx
Use the show lldp dcbx command in Privileged EXEC mode to display the
per interface DCBX configuration and status.
Syntax
show lldp dcbx [interface <all | interface-id [detail | status]>]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
Parameter Description
interface-id A valid physical interface specifier.
all All interfaces.
Detail Display detailed DCBX information.
Status Displays a status summary.
2CSPC4.XModular-SWUM201.book Page 852 Monday, October 3, 2011 2:21 PM