Command Line Interface Guide

Command Groups 85
Auto-VoIP
CDP Interoperability
a. For the meaning of each Mode abbreviation, see Mode Typeson page 79.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
switchport voice detect
auto
Enables the VoIP Profile on all the interfaces of
the switch.
GC or
IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
Command Description Mode
a
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
isdp advertise-v2 Enables the sending of ISDP version 2 packets
from the device.
GC
isdp enable Enables ISDP on the switch. GC or
IC
isdp holdtime Configures the hold time for ISDP packets that
the switch transmits.
GC
isdp timer Sets period of time between sending new ISDP
packets.
GC
show isdp Displays global ISDP settings. PE
show isdp interface Displays ISDP settings for the specified
interface.
PE
show isdp entry Displays ISDP entries. PE
show isdp neighbors Displays the list of neighboring devices. PE
show isdp traffic Displays ISDP statistics. PE
2CSPC4.XModular-SWUM201.book Page 85 Monday, October 3, 2011 2:21 PM