Command Line Interface Guide

84 Command Groups
mac address-table multicast
forward-all
Enables forwarding of all Multicast packets on a
port.
IC
mac address-table multicast
forward-unregistered
Enables the forwarding of unregistered
multicast addresses.
IC
mac address-table multicast
static
Registers MAC-layer Multicast addresses to the
bridge table, and adds static ports to the group.
IC
mac address-table static Adds a static MAC-layer station source address
to the bridge table.
IC
port security Disables new address learning on an interface. IC
port security max Configures the maximum addresses that can be
learned on the port while the port is in port
security mode.
IC
show mac address-table Displays dynamically created entries in the
bridge-forwarding database.
PE
show mac address-table
address
Displays all entries in the bridge-forwarding
database for the specified MAC address.
UE or
PE
show mac address-table
count
Displays the number of addresses present in the
Forwarding Database.
PE
show mac address-table
dynamic
Displays all entries in the bridge-forwarding
database.
UE or
PE
show mac address-table
filtering
Displays the Multicast filtering configuration. PE
show mac address-table
interface
Displays the mac forwarding table entries for a
specific interface.
UE or
PE
show mac address-table
multicast
Displays Multicast MAC address table
information.
PE
show mac address-table
static
Displays statically created entries in the bridge-
forwarding database.
PE
show mac address-table
vlan
Displays all entries in the bridge-forwarding
database for the specified VLAN.
UE or
PE
show ports security Displays the port-lock status. PE
show ports security
addresses
Displays current dynamic addresses in locked
ports.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 84 Monday, October 3, 2011 2:21 PM