Command Line Interface Guide

Command Groups 83
Address Table
ip access-group Attaches a specified access-control list to an
interface.
GC or
IC
mac access-group Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
GC or
IC
mac access-list extended Creates the MAC Access Control List (ACL)
identified by the name parameter.
GC
mac access-list extended
rename
Renames the existing MAC Access Control List
(ACL) name.
GC
service-acl input Blocks Link Local Protocol Filtering (LLPF)
protocol(s) on a given port.
IC
show service-acl interface Displays the status of LLPF rules configured on
a particular port or on all the ports.
PE
show ip access-lists Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
PE
show mac access-list Displays a MAC access list and all of the rules
that are defined for the ACL.
PE
a. For the meaning of each Mode abbreviation, see Mode Typeson page 79.
Command Description Mode
a
clear mac address-table Removes any learned entries from the
forwarding database.
PE
mac address-table aging-
time
Sets the address table aging time. GC
mac address-table multicast
filtering
Enables filtering of Multicast addresses. GC
mac address-table multicast
forbidden address
Forbids adding a specific Multicast address to
specific ports.
IC
mac address-table multicast
forbidden forward-
unregistered
Forbids a port to be a forwarding-unregistered-
multicast-addresses port.
IC
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 83 Monday, October 3, 2011 2:21 PM