Command Line Interface Guide

82 Command Groups
ACL
enable password Sets a local password to control access to the
normal level.
GC
ip http authentication Specifies authentication methods for http. GC
ip https authentication Specifies authentication methods for https. GC
login authentication Specifies the login authentication method list
for a remote telnet or console.
LC
password (IAS) Configures a password for a user. AAA
password Specifies a password on a line. LC
password Specifies a user password UE
show aaa ias-users Displays configured IAS users and their
attributes.
PE
show authentication
methods
Shows information about authentication
methods.
PE
show user accounts Displays information about the local user
database.
PE
show users login-history Displays information about login histories of
users.
PE
username Establishes a username-based authentication
system.
GC
username password
encrypted username unlock
Transfers local user passwords between devices
without having to know the passwords.
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
access-list Creates an Access Control List (ACL) that is
identified by the parameter
accesslistnumber.
GC
deny | permit The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 82 Monday, October 3, 2011 2:21 PM