Command Line Interface Guide

VLAN Commands 797
Default Configuration
Routing is enabled on VLAN 1 by default.
Command Mode
VLAN Database mode
User Guidelines
This command has no user guidelines.
Examples
console(config-vlan)# vlan routing 10 1
index Internal interface ID. This optional parameter is listed in the
configuration file for all VLAN routing interfaces. When a
nonstop forwarding failover occurs, this information enables
the system to correlate checkpointed state information with the
proper interfaces and their configuration.
Parameter Description
2CSPC4.XModular-SWUM201.book Page 797 Monday, October 3, 2011 2:21 PM