Command Line Interface Guide

78 Command Groups
DHCP Server and Relay
Agent (IPv4)
Manages DHCP/BOOTP operations on the system.
DHCPv6 Configures IPv6 DHCP functions.
DVMRP (Mcast) Configures DVMRP operations.
IGMP (Mcast) Configures IGMP operations.
IGMP Proxy (Mcast) Manages IGMP Proxy on the system.
IP Helper/DHCP Relay Configures relay of UDP packets.
IP Routing (IPv4) Configures IP routing and addressing.
IPv6 Multicast Manages IPv6 Multicasting on the system.
IPv6 Routing Configures IPv6 routing and addressing.
Loopback Interface
(IPv6)
Manages Loopback configurations.
Multicast (Mcast) Manages Multicasting on the system.
OSPF (IPv4) Manages shortest path operations.
OSPFv3 (IPv6) Manages IPv6 shortest path operations.
Router Discovery
Protocol (IPv4)
Manages router discovery operations.
Routing Information
Protocol (IPv4)
Configures RIP activities.
Tunnel Interface (IPv6) Managing tunneling operations.
Virtual Router
Redundancy (IPv4)
Controls virtual LAN routing.
Virtual Router
Redundancy (IPv4)
Manages router redundancy on the system.
Utility Commands
Auto-Install Automatically configures switch when a configuration file
is not found.
Captive Portal Blocks clients from accessing network until user
verification is established.
Table 1-1. System Command Groups
(continued)
Command Group Description
2CSPC4.XModular-SWUM201.book Page 78 Monday, October 3, 2011 2:21 PM