Command Line Interface Guide

Port Channel Commands 623
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax Description
show interfaces port-channel [ port-channel-number ]
• [ index ] — Number of the port channel to show. This parameter is
optional. If the port channel number is not given, all the channel groups
are displayed. (Range: Valid port-channel number, 1 to 48)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Parameter Description
min-links The minimum number of links that must be active before the
link is declared up. Range 1-8. The default is 1.
2CSPC4.XModular-SWUM201.book Page 623 Monday, October 3, 2011 2:21 PM