Command Line Interface Guide

622 Port Channel Commands
no lacp
Use the no lacp command to set the LACP (Link Aggregation) mode to
default for that Aggregator Group. The default LACP mode is dynamic.
Syntax
no lacp
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 2
console(config-aggregator-2)#no lacp
console(config-aggregator-2)#
port-channel min-links
Use the port-channel min-links command in Interface Configuration (port-
channel) mode to set the minimum number of links that must be up in order
for the port channel interface to be declared up. Use the no form of the
command to return the configuration to the default value (1).
Syntax
port-channel min-links 1-8
no port-channel min-links
2CSPC4.XModular-SWUM201.book Page 622 Monday, October 3, 2011 2:21 PM