Command Line Interface Guide

Port Channel Commands 617
• 6 — Source/destination IP and source/destination TCP/UDP port
• 7 — Enhanced hashing mode
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel l
console(config-if-po1)#hashing-mode 4
console(config-if-po1)#no hashing mode
lacp auto
Use the lacp auto command to set the LACP (Link Aggregation) mode to
dynamic for that Aggregator Group. This means that when more than one
uplink port is in the Group, those uplink ports will be enabled automatically
with dynamic LACP.
Syntax
lacp auto
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
2CSPC4.XModular-SWUM201.book Page 617 Monday, October 3, 2011 2:21 PM