Command Line Interface Guide

iSCSI Optimization Commands 557
iSCSI enabled
iSCSI CoS enabled
iSCSI vpt is 5
Session aging time: 10 min
Maximum number of sessions is 192
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address Name
860 - -
3260 - -
30001 172.16.1.1 iqn.1993-11.com.disk-
vendor:diskarrays.sn.45678.tape:sys1.xyz
30033 172.16.1.10
------------------------------------------------
iSCSI Static Rule Table
------------------------------------------------
Index TCP Port IP Address IP Address Mask
TCP Port Target IP Address Name
show iscsi sessions
Use the show iscsi sessions command in Privileged EXEC mode to display the
iSCSI status.
Syntax
show iscsi sessions [detailed]
• detailed — Displayed list has additional data when this option is used.
Default Configuration
If not specified, sessions are displayed in short mode (not detailed).
2CSPC4.XModular-SWUM201.book Page 557 Monday, October 3, 2011 2:21 PM