Command Line Interface Guide

510 IP Addressing Commands
DHCPv6 Request Packets Transmitted............. 0
DHCPv6 Renew Packets Transmitted............... 0
DHCPv6 Rebind Packets Transmitted.............. 0
DHCPv6 Release Packets Transmitted............. 0
Total DHCPv6 Packets Transmitted............... 8
show ipv6 interface out-of-band
Use the show ipv6 interface out-of-band command in Privileged EXEC mode
to show the ipv6 out-of-band port configuration.
Syntax
show ipv6 interface out-of-band
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console(config-if)#do show ipv6 interface out-of-band
IPv6 Administrative Mode....................... Enabled
IPv6 Prefix is................................. FE80::21E:C9FF:FEAA:AD79/64
::/128
Parameter Description
ipv6-address An IPv6 address (not a prefix).
2CSPC4.XModular-SWUM201.book Page 510 Monday, October 3, 2011 2:21 PM