Command Line Interface Guide

Ethernet Configuration Commands 427
Most Address Entries Ever Used................. 3
Address Entries Currently in Use............... 3
Maximum VLAN Entries........................... 1024
Most VLAN Entries Ever Used.................... 2
Static VLAN Entries............................ 2
Dynamic VLAN Entries........................... 0
VLAN Deletes................................... 0
Time Since Counters Last Cleared............... 0 day
18 hr 1 min 59 sec
show storm-control
Use the show storm-control command in Privileged EXEC mode to display
the configuration of storm control.
Syntax
show storm-control [all | {gigabitethernet unit/slot/port |
tengigabitethernet
unit/slot/port }]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM201.book Page 427 Monday, October 3, 2011 2:21 PM