Command Line Interface Guide

Ethernet Configuration Commands 425
Octets Transmitted............................. 0
Packets Transmitted Without Errors............. 0
Unicast Packets Transmitted.................... 0
Multicast Packets Transmitted.................. 0
Broadcast Packets Transmitted.................. 0
Transmit Packets Discarded..................... 0
Most Address Entries Ever Used................. 3
Address Entries Currently in Use............... 3
Maximum VLAN Entries........................... 1024
Most VLAN Entries Ever Used.................... 2
Static VLAN Entries............................ 2
Dynamic VLAN Entries........................... 0
VLAN Deletes................................... 0
Time Since Counters Last Cleared... 0 day 18 hr 1 min 59 sec
show statistics switchport
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics { interface-id |switchport}
Parameter Description
Parameter Description
interface-id Interface id. See Interface Naming Conventions for interface
representation.
switchport Displays statistics for the entire switch.
2CSPC4.XModular-SWUM201.book Page 425 Monday, October 3, 2011 2:21 PM