Command Line Interface Guide

420 Ethernet Configuration Commands
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Name Duplex Speed Neg Link Flow Control
State Status
------- -------------- ------ ------- ---- ----- ------------
Gi1/0/1 N/A Unknown Auto Down Inactive
Gi1/0/2 N/A Unknown Auto Down Inactive
Gi1/0/3 ADM-10.0.12.13 N/A Unknown Auto Down Inactive
show statistics
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {gigabitethernet unit/slot/port |switchport | port-channel
port-channel-number | tengigabitethernet unit/slot/port }
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
unit/slot/port A valid interface. See Interface Naming Conventions for
interface representation.
switchport Displays statistics for the entire switch.
2CSPC4.XModular-SWUM201.book Page 420 Monday, October 3, 2011 2:21 PM