Command Line Interface Guide

Using the CLI 175

Port Channel Interfaces

Port-channel (or LAG) interfaces are represented in the CLI by the variable

port-channel-number

., which can can assume values from 1-48.

When listed in command line output, port channel interfaces are preceded by

the characters

Loopback Interfaces

Loopback interfaces are represented in the CLI by the variable

loopback-id

which can assume values from 0–7.

VLAN Interfaces

VLAN interfaces are represented in the CLI by the variable

vlan-id

, which

can can assume values from 1-4093.

Tunnel Interfaces

Tunnel interfaces are represented in the CLI by the variable

tunnel-id

, which

can can assume values from 0–7.

Examples

Example #1

gigabitethernet 1/0/1

gigabitethernet1/0/1 (there is no space)

gi 1/0/1

gi1/0/1 (there is no space)

port-channel 1

vl 5

Example #2

console#show vlan

VLAN Name Ports Type

----- --------------- ------------- --------------

2CSPC4.XModular-SWUM201.book Page 175 Monday, October 3, 2011 2:21 PM