Command Line Interface Guide

1656 System Management Commands
Example
console#show interfaces advanced firmware
Port Revision Part number
-------- ----------- -----------
Te1/0/1 0x411 BCM8727
Te1/0/2 0x411 BCM8727
Te1/0/3 0x411 BCM8727
Te1/0/4 0x411 BCM8727
Te1/0/5 0x411 BCM8727
show ip interface out-of-band
Use the show ip interface out-of-band command to disable DHCP/BOOTP
on the OOB port.
Syntax
show ip interface out-of-band
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show ip interface out-of-band
IP Address............................ 10.240.4.115
2CSPC4.XModular-SWUM201.book Page 1656 Monday, October 3, 2011 2:21 PM