Command Line Interface Guide

System Management Commands 1643
Syntax
ip address none
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (out-of-band)
User Guidelines
No specific guidelines.
Example
console(config)#interface out-of-band
console(config-if)#ip address none
ip address {dhcp/bootp}
Use the ip address command to enable DHCP/BOOTP on the OOB port.
Syntax
ip address {dhcp/bootp}
Command Mode
Interface Configuration (out-of-band)
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.
Example
console(config)#interface out-of-band
2CSPC4.XModular-SWUM201.book Page 1643 Monday, October 3, 2011 2:21 PM