Command Line Interface Guide

Command Groups 163
Telnet Server
Terminal Length
Time Ranges
standby Configures the standby in the stack. SG
switch renumber Changes the identifier for a switch in the stack. GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when travelling to their destinations.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
ip telnet server disable Enables/disables the Telnet service on the
switch.
GC
ip telnet port Configures the Telnet service port number on
the switch.
GC
show ip telnet Displays the status of the Telnet server and the
Telnet service port number.
PE
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
terminal length Sets the terminal length. PE
Command Description Mode
a
time-range Creates a time range identified by name,
consisting of one absolute time entry and/or one
or more periodic time entries.
GC
absolute Adds an absolute time entry to a time range. TRC
periodic Adds a periodic time entry to a time range. TRC
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 163 Monday, October 3, 2011 2:21 PM