Command Line Interface Guide

Command Groups 161
initiate failover Forces failover of management unit. GC
ip address Sets a static OOB port IP address. IC (out-
of-band)
ip address none Disables DHCP/BOOTP on the OOB port. IC (out-
of-band)
ip address {dhcp/bootp} Enables DHCP/BOOTP on the OOB port. IC (out-
of-band)
login-banner Enables login banner on the console, telnet, or
SSH connection.
LC
member Configures the switch. SG
motd-banner Enables motd on the console, telnet, or SSH
connection.
LC
nsf Specifies non-stop forwarding. GC
ping Sends ICMP echo request packets to another
node on the network.
UE
reload Reloads the operating system. PE
set description Associates a text description with a switch in
the stack.
SG
slot Configures a slot in the system. GC
show banner Displays banner information. PE
show boot-version Displays the boot image version details. UE
show checkpoint
statistics
Displays the statistics for the checkpointing
process.
PE
show cut-through mode Show the cut-through mode on the switch. PE
show interfaces
advanced firmware
Displays the firmware revision of the PHY for a
port.
PE
show ip interface out-of-
band
Disables DHCP/BOOTP on the OOB port. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show nsf Shows non-stop forwarding status. PE
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 161 Monday, October 3, 2011 2:21 PM