Command Line Interface Guide

Command Groups 155
SDM Templates
Serviceability Tracing
show rmon statistics Displays RMON Ethernet Statistics. UE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
sdm prefer Changes the template that will be active after
the next reboot.
GC
show sdm prefer Views the currently active SDM template and
its scaling parameters, or views the scaling
parameters for an inactive template.
PE
Command Description Mode
a
debug arp Enables tracing of ARP packets. PE
debug auto-voip Enables Auto VOIP debug messages. PE
debug clear Disables all debug traces. PE
debug console Enables the display of debug trace output on
the login session in which it is executed.
PE
debug dot1x Enables dot1x packet tracing. PE
debug igmpsnooping Enables tracing of IGMP Snooping packets
transmitted and/or received by the switch.
PE
debug ip acl Enables debug of IP Protocol packets matching
the ACL criteria.
PE
debug ip dvmrp Traces DVMRP packet reception and
transmission.
PE
debug ip igmp Traces IGMP packet reception and
transmission.
PE
debug ip mcache Traces MDATA packet reception and
transmission.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 155 Monday, October 3, 2011 2:21 PM