Command Line Interface Guide

148 Command Groups
CLI Macro
Clock
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
macro name Creates a user-defined macro. GC
macro global apply Use to apply a macro. GC
macro global trace Applies and traces a macro. GC
macro global description Appends a line to the global macro description. GC
macro apply Use to apply a macro. IC
macro trace Applies and traces a macro. IC
macro description Appends a line to the macro description. IC
show parser macro Displays information about defined macros. PE
Command Description Mode
a
show clock Displays the time and date of the system clock. PE
show sntp configuration Displays the SNTP configuration. PE
show sntp server Displays the pre-configured SNTP servers. PE
show sntp status Displays the SNTP status. PE
sntp authenticate Set to require authentication for received NTP
traffic from servers.
GC
sntp authentication-key Defines an authentication key for SNTP. GC
sntp broadcast client
enable
Enables SNTP Broadcast clients. GC
sntp client poll timer Defines polling time for the SNTP client. GC
sntp server Configures the SNTP server to use SNTP to
request and accept NTP traffic from it.
GC
sntp trusted-key Authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will
synchronize.
GC
2CSPC4.XModular-SWUM201.book Page 148 Monday, October 3, 2011 2:21 PM