Command Line Interface Guide

144 Command Groups
Utility Commands
Auto-Install
vrrp timers learn Configures the router, when it is acting as
backup virtual router for a VRRR group, to learn
the advertisement interval used by the master
virtual router.
IC
vrrp track interface Alters the priority of the VRRP router based on
the availability of its interfaces.
IC
vrrp track ip route Tracks route reachability. IC
show vrrp Displays the global VRRP configuration and
status as well as the brief or detailed status of
one or all VRRP groups.
UE or
PE
show vrrp interface Displays all configuration information and
VRRP router statistics of a virtual router
configured on a specific interface.
UE or
PE
show vrrp interface brief Displays information about each virtual router
configured on the switch.
PE
show vrrp interface stats Displays the statistical information about each
virtual router configured on the switch.
PE
Pingable VRRP Commands
ip vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
show ip vrrp interface Displays the configured value for Accept Mode. UE or
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 144 Monday, October 3, 2011 2:21 PM